Send inquiry
?Equipment introduction?
Filter Damage Resistance Test Stand is used to test the pressure difference when the fuel filter element is structurally damaged, determine the filter element resistance to high pressure drop and the ability of bearing internal pressure of assembly.
?Test items?
a. Diesel filter assembly damage resistance test
b. Diesel filter filter element high pressure drop resistance test
c. Gasoline filter damage resistance test
d. Filter element of gasoline filter high pressure drop resistance test
e. Gasoline filter test piece test interface, need to connect the hose by yourself
?Applicable standards?
QC/T772-2XXX Test methods of diesel-fuel filter for automobiles
GB/T 5923-2010 Test methods of fuel filter for automotive compression ignition engines
QC/T918-2013 Test methods of petrol-fuel filter for automobiles
?Technical parameters?
Main fuel tank volume: 12L (stainless steel)
Gear pump: 6 L/min, efficiency =72%
Pressure sensor: 0-1.5MPa±1.5%
Differential pressure sensor: 0-700KPa±1.5%
Temperature sensor: 0-100 ?
Turbine flowmeter: 0.67-4.16 L/min±5%
Mixing motor: 10-1000 r/min
Manual oil pump: 3L, pressure: 1MPa
Max test power: 2.5Kw
Conventional system test pressure difference (for filter element resistance to high pressure drop): 300KPa
Manual system test pressure (for filter element resistance to high pressure drop): 1000KPa
System flow test range: 0.67-4.16 L/min
It has automatic display of current working condition parameters, automatic alarm, stop automatic recording of test data, and test data printing.link:https://www.zwh-autotest.com/filter-test-equipment/filter-damage-resistance-test-stand.html